Four types of Nitto 7mm dia rack stays now for Mark's rack or the Top rack or Big back rack or Hirighder.

- Extra long straight 35cm rack struts  (20-077)
- Bent 15cm rack struts, 15mm of offset (20-025)
- Bent 12cm rack struts, 15mm of offset (20-023)
- Straight 8cm rack struts (20-024)

Sold as a pair.  Easy to bend to get just the right angle to the frame braze-on and easy to cut with a hacksaw.  The 35cm and 15cm struts are smooth while the 12cm and 8cm struts are knurled; the special Nitto rack bolt (below) holds both equally well.

And

one Nitto rack nut, bolt, washer (20-184).  Stainless steel.


And

Stainless steel diving board plate  (20-029).

For mounting the Highrider, Mark's, Two-strut top rack on the rear just in case your frame doesn't have rear rack braze-ons or in addition to the struts for redundancy.  Some bending of the board may be required depending on the placement of your brake bridge, size of your frame.  Can also be bent for use on the front.